Antenna Testing

Request for Antenna Pattern Testing Quote

Complete the form below and we will provide you a quote as soon as possible! Required fields are marked with an asterisk (*). Our experts will contact you if there is additional information needed in order to complete your quotation.

If you have questions, need assistance or want to directly contact our personnel, click here for personal contacts. We are happy to help you!

About your product

Is your product transmitting (active) or will we drive the antenna (passive)?

ActivePassive

Do you want to measure Total Radiated power (TRP) or Total Received Sensitivity (TRS)?

YesNo

TRPTIS

Cellular modes *

GSMWCDMALTE

Does the device include voice?

YesNo

WLAN 2.4GHzWLAN 5.0GHz

Antenna Port Input Power (APIP) numbers are used to calculate gain and efficiency for Active measurements. The values should be in terms of RMS to match the antenna measurements. Please let us know if the radiated power will be greater than 1 Watt.

Typical scan will be 15 degrees, 3D patterns. Please indicate if you would like finer resolution than 15 degrees. Assumptions: module/product will be set to constant transmit CW or maximum duty cycle. The DUT will be battery operated or AC Powered via 230VAC/50Hz and less than 15Amps (if applicable). DUT communicates with TESTiLABS’ cellular communication call boxes.

Antenna Port Input Power (APIP) numbers are used to calculate gain and efficiency for Active measurements. The values should be in terms of RMS to match the antenna measurements. Please let us know if the radiated power will be greater than 1 Watt.

Typical scan will be 15 degrees, 3D patterns. Please indicate if you would like finer resolution than 15 degrees. Assumptions: module/product
will be set to constant transmit CW or maximum duty cycle. The DUT will be battery operated or AC Powered via 230VAC/50Hz and less than 15Amps (if applicable). DUT communicates with TESTiLABS’ cellular communication call boxes.

Provide connection to the antenna with SMA or N adapter. For antennas with other connectors please adapt to SMA. Also, if the equipment under test has multiple antenna ports provide loads for these ports.

Typical scan will be 15 degrees, 3D patterns. Please indicate if you would like finer resolution than 15 degrees.

Order our newsletter

Receive news about our latest activities and test innovations.