Request a Quote

Complete the form below and we will provide you a quote as soon as possible! Required fields are marked with an asterisk (*). Our experts will contact you if there is additional information needed in order to complete your quotation.

If you have questions, need assistance or want directly contact our personnel, click here for personal contacts. We are happy to help you!

Request a Quote

About your product

Is your product transmitting (active) or will we drive the antenna (passive)?

ActivePassive

Do you want to measure Total Radiated power (TRP) or Total Received Sensitivity (TRS)?

YesNo

TRPTIS

Cellular modes *

GSMWCDMALTE

Does the device include voice?

YesNo

WLAN 2.4GHzWLAN 5.0GHz

Antenna Port Input Power (APIP) numbers are used to calculate gain and efficiency for Active measurements. The values should be in terms of RMS to match the antenna measurements. Please let us know if the radiated power will be greater than 1 Watt.

Typical scan will be 15 degrees, 3D patterns. Please indicate if you would like finer resolution than 15 degrees. Assumptions: module/product will be set to constant transmit CW or maximum duty cycle. The DUT will be battery operated or AC Powered via 230VAC/50Hz and less than 15Amps (if applicable). DUT communicates with TESTiLABS’ cellular communication call boxes.

Antenna Port Input Power (APIP) numbers are used to calculate gain and efficiency for Active measurements. The values should be in terms of RMS to match the antenna measurements. Please let us know if the radiated power will be greater than 1 Watt.

Typical scan will be 15 degrees, 3D patterns. Please indicate if you would like finer resolution than 15 degrees. Assumptions: module/product
will be set to constant transmit CW or maximum duty cycle. The DUT will be battery operated or AC Powered via 230VAC/50Hz and less than 15Amps (if applicable). DUT communicates with TESTiLABS’ cellular communication call boxes.

Provide connection to the antenna with SMA or N adapter. For antennas with other connectors please adapt to SMA. Also, if the equipment under test has multiple antenna ports provide loads for these ports.

Typical scan will be 15 degrees, 3D patterns. Please indicate if you would like finer resolution than 15 degrees.

1. Type of Quotation

A budgetary quote for your project planningQuote for certification and/or country approval

Tip: Budgetary quote can be given considerably faster and with less product detail info

2. Target markets

EU (CE marking)USA (FCC) and Canada (ISED)ChinaJapanOther countries, please specify *

3. Product type

Non- Wireless Consumer product (no radios in the product)Wireless Consumer productMedical productAutomotiveMilitaryOther, please describe *

Please, tell us how your product is used.

For example: Product is handheld / carried or worn by the user / placed on the desk/wall/equipment cabinet. UI solution: No UI / touch screen / key board / remote by cable/wireless connection.

Additional documents (e.g. product data sheet, picture of your product, etc.)

4. Product information

Content of the sales package

Please, describe content of the sales package (charger, cables, headsets etc.)

Power supply

1 phase AC 110/240V (60/50Hz) powered

Separate AC/DC charger

Is the charger already certified?

YesNo

DC powered (DC input)

Is the charger already certified?

YesNo

Battery operated

Is the battery IE 62133 certified?

YesNo

Interfaces

USB 2.0USB 3.0Ethernet (RJ45)HDMIDIN

Radio Connectivity

Bluetooth

I am using CE and/or FCC Certified ModuleI am using BT SIG Qualified Module/SoCI am using discrete Bluetooth component and PCB design

So, you are using CE and/or FCC Certified Module.

Is the module configuration the same as as used in the Module certification?
YesNo

Is the antenna solution the same as used in module certification?
YesNo

So, you are using BT SIG Qualified Module/SoC.

My design is done according manufacturer design instructions: YesNo

So, you are using discrete Bluetooth component and PCB design.

My bluetooth profile is:

BR/EDRBR/EDR and BLE (Dual Mode)BLE

My design is done according manufacturer design instructions: YesNo

Wifi

I am using CE and/or FCC Certified ModuleI am using Wi-Fi SoC and own PCB design

So, you are using CE and/or FCC Certified Module.

My antenna solution the same as used in module certification: YesNo

Module configuration is the same as used in module certification: YesNo

So, you are using Wi-Fi SoC and own PCB design.

My product supports the following Wi-Fi modes: 802.11a802.11b802.11g802.11n802.11ac

I wish to have Wi-Fi Alliance Certification

Cellular Radios

I am using CE and/or FCC Certified ModuleI am using cellular modem SoC and own PCB design

So, you are using CE and/or FCC Certified Module.

My antenna solution the same as used in module certification: YesNo

Module configuration is the same as used in module certification: YesNo

So, you are using cellular modem SoC and own PCB design.

Please provide information on:

  • 1) used radio shipset (e.g. snapdragon xxx)
  • 2. supported technologies (e.g. 2G, 3G, 4G, LTE-M1, LTE-NB)
  • 3. Used frequency bands for each technology”]


LoRa

My antenna solution the same as used in module certification: YesNo

Module configuration is the same as used in module certification: YesNo

ZigBee 802.14-4


My antenna solution the same as used in module certification: YesNo

Module configuration is the same as used in module certification: YesNo

RFID

Passive RFIDActive RFID

Positioning (GNSS)

I am using CE and/or FCC Certified Module


My antenna solution the same as used in module certification: YesNo

Module configuration is the same as used in module certification: YesNo

Other radio(s)

1. About your product

General description of your device (e.g. size, weight)

Additional documents you are able to share (e.g. product data sheet, picture of your product, etc.)

2. Type of quotation

Category of your device

AutomotiveConsumerHealthcareIndustrialMedicalMilitaryMeasurementSomething else, please describe *

If you have a test plan and if it’s possible to share, please send it to us

Climatic and Environmental Testing needs:

Temperature and moisture testingIP test (Ingress protection, waterproofing, solid object intrusion, dust)Salt spray/mistSolar Radiation/UV testing (Ultraviolet exposure)Chemical testingCombination of from aboveSomething else, please describe *

1. Type of Quotation

A budgetary quote for your project planningQuote for pre-evaluation testingAccredited testing

Tip: Budgetary quote can be given considerably faster and with less product detail info

2. Target markets

EU (CE marking)USA (FCC) and Canada (ISED)ChinaJapanOther countries, please specify *

3. Product type

Non- Wireless Consumer product (no radios in the product)Wireless Consumer productMedical productAutomotiveMilitaryOther, please describe *

Please, tell us how your product is used.

For example: Product is handheld / carried or worn by the user / placed on the desk/wall/equipment cabinet. UI solution: No UI / touch screen / key board / remote by cable/wireless connection.

Additional documents (e.g. product data sheet, picture of your product, etc.)

4. Product information

Content of the sales package

AC/DC chargerUSB cableHeadsetOther

* Please, describe content of the sales package

Pre-cert module2G3GLTEBluetoothWi-FiNFCGNSSOther radio(s)

Pre-cert module: Module modelAny configuration

Bluetooth: BR/EDRBLEDual mode (BR/EDR/BLE

Wi-Fi: 802.11 ac/b/g/n, (list supported)

GNSS: GPSGlonassBeiDou

Power supply

1 phase AC 110/240V (60/50Hz) poweredSeparate AC/DC chargerDC powered (DC input)Battery operateOther *

Interfaces

USB 2.0 (micro)USB 3.0 (C-type)ChargingRJ-45Other *

USB 2.0 (micro): PC dataCharging

USB 3.0 (C-type): PC data

RJ-45: 10/100 Mbps1000 Mbps

1. About your product

General description of your device (e.g. size, weight, materials)

Additional documents you are able to share (e.g. product data sheet, picture of your product, etc.)

2. Type of quotation

Category of your device

CommercialIndustrialHealthcareMedicalMilitaryMeasurementOther, please describe *

If you have a test plan and if it’s possible to share, please send it to us

Mechanical testing needs:

Vibration testDrop and impact testsBending-, pressing-, mechanical cycling test, force measurementsMaterial testingAbrasion-, scratching-, surface hardness testSomething else *

Where did you hear about us?

What are the product’s sales regions?

What are the product’s sales countries?

Is GCF Field Trial needed?

YesNo

Is operator approval needed?

YesNo

Operator approval is needed from following operators?

Is there IMS service test needed?

YesNo

Following IMS services need to be tested

Any special test areas?

Additional document (e.g. product data sheet)

Where did you hear about us?

Are you looking for accredited or product development testing? *

Accredited testing (CE, FCC & ISED)Product development testing

CEFCCISED

Cellular modes

GSMGPRSEDGEWCDMALTEWLAN 2.4GHzWLAN 5.0GHzBLE/BT

Does Wlan and Bluetooth use the same antenna?

YesNo

Does your device include simultaneous transmission possibilities?

YesNo

Please describe, what radios can transmit at the same time.

Does the device have exchangeable battery?

YesNo

Cellular modes

GSMGPRSEDGEWCDMALTEWLAN 2.4GHzWLAN 5.0GHzBLE/BT

Does Wlan and Bluetooth use the same antenna?

YesNo

Does your device include simultaneous transmission possibilities?

YesNo

Please describe, what radios can transmit at the same time.

Does the device have exchangeable battery?

YesNo

Please describe your device’s indented use case.

General description of your device (e.g. size, weight)

Additional document (e.g. product data sheet)