From January 2027, Indonesia will limit the acceptance of foreign laboratory reports for telecommunications equipment certification to laboratories recognised through Mutual Recognition Agreements.
At a glance
n Existing non-MRA foreign laboratory recognition expires on 31 December 2026.
n From 1 January 2027, new certification testing will need to use designated Indonesian laboratories or foreign laboratories recognised through an MRA.
n Reports issued before a laboratory’s recognition expires may remain usable for a limited period, subject to applicable regulatory conditions.
What changes under Indonesia’s 2027 laboratory requirements?
Indonesia’s Directorate General of Digital Infrastructure (DJID, formerly SDPPI) is preparing for a change in the acceptance of foreign laboratory test reports from 1 January 2027.
Under Ministerial Regulation No. 5 of 2024, recognition of foreign laboratories through the non-Mutual Recognition Agreement (non-MRA) mechanism is valid only until 31 December 2026.
The recognised non-MRA laboratories were subsequently designated under Ministerial Decree No. 13 of 2025.
Following the transition, certification testing will need to be performed by:
· Designated laboratories in Indonesia, or
· Foreign laboratories recognised by DJID through an applicable MRA.
This is a change to laboratory recognition and test report acceptance, rather than a new technical testing standard.
Which products and test reports are affected?
The requirements are relevant to telecommunications equipment subject to DJID certification, including:
· HKT products: Mobile phones, handheld computers and tablets.
· Non-HKT products: Other telecommunications equipment, including applicable wireless and communication devices.
Laboratory recognition must be checked against the relevant product category and testing scope.
A laboratory’s existing ISO/IEC 17025 accreditation or its ability to perform CE/FCC testing does not automatically establish eligibility for DJID certification.
Manufacturers should therefore verify both the laboratory’s current DJID recognition and its authorised testing scope before arranging new tests.
Can existing test reports still be used after December 2026?
Article 41 of Ministerial Regulation No. 5 of 2024 provides that test reports already issued by a laboratory whose designation has expired may remain usable for certification for up to six months after the designation expires.
However, this provision does not extend the laboratory’s authorisation to perform new certification testing.
The specific administrative handling of reports during the 2027 transition should still be confirmed with DJID, particularly for applications relying on reports from non-MRA laboratories.
Manufacturers should not assume that all previously issued reports will automatically be accepted regardless of their technical scope, laboratory status or submission date.
Testilabs view: What should manufacturers prepare?
For manufacturers planning Indonesian market entry in 2027, the main consideration is whether their existing testing arrangements will remain suitable for DJID certification.
Before starting a new project, manufacturers should:
· Verify laboratory eligibility: Check whether the selected laboratory will remain recognised after December 2026.
· Review existing reports: Confirm the laboratory’s recognition status, report date, product category and testing scope.
· Check report acceptance: Determine whether existing test data can still support the intended application.
· Plan future testing: Identify suitable Indonesian or MRA-recognised laboratories where new testing may be required.
For companies developing products for multiple markets, CE or FCC test reports should not automatically be assumed to satisfy Indonesia’s laboratory recognition requirements.
Early review of testing locations and existing documentation may help manufacturers avoid unnecessary retesting and certification delays during the transition.
Related Testilabs services: Country-Specific Approvals · EMC & RF Testing