EMC and RF Testing
Why EMC and RF testing?
All electronic devices emit electromagnetic fields and thus influence other devices when interconnected or are in close proximity. Just look around at home. TV, Mobile Phones, WiFi routers, electrical power lines, microwave oven may all disturb or be disturbed by each other if not properly designed for EMC (Electromagnetic Compatibility).
Manufacturer is responsible for ensuring that a device is compliant with the EMC requirements set by authorities in different markets. In EU product must comply with the EMC Directive. The EMC Directive sets limits for both emissions (product does not disturb others) and immunity (product can stand interference coming from other devices). In US FCC sets limits only for emissions.
RF test checks if product’s radio transmitter and receiver work as specified. How much RF tests are to be done depends very much on how the product is implemented.
EMC and RF tests
Our accredited EMC and RF test services include:
- Conducted Emissions
- Radiated Emissions
- Radiated RF field
- Radio frequency common mode
- Burst, Surge, Electrical Fast Transients, Voltage dips and interruptions
- Power and pulsed magnetic fields
- Radiated spurious emission testing for e.g GSM, WCDMA, LTE, Bluetooth, WLAN
Pre-compliance EMC and RF testing
Selected EMC and RF tests during the R&D phase (Pre-Compliance tests) are very important to ensure your product quality and a smooth certification process.
We can offer Pre-Compliance EMC Testing services beyond our current accreditation scope for consumer, medical and industrial products. We are happy provide more detailed information and make a proposal how we can verify your product.
EN 301 489-1, EN 301 489-3
EN 301 489-17, EN 301 489-19, EN 301 489-20
EN 301 489-34, EN 301 489-52
IEC/EN 61000-3-2, IEC/EN 61000-3-3
IEC/EN 61000-4-2, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-9, IEC/EN 61000-4-11
IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, IEC/EN 61000-6-4
CISPR 11 / EN 55011, CISPR 22 / EN 55022, CISPR 24 / EN 55024
CISPR 32 / EN 55032 Exclusions: TVs, set top boxes
CISPR35 / EN 55035 Exclusions: broadcast receivers, CPEs containing xDSL ports
IEC/EN 61326-1, IEC/EN 61326-2-1, IEC/EN 61326-2-2, IEC/EN 61326-2-3, IEC/EN 61326-2-4, IEC/EN 61326-2-5
3GPP TS 51.010-1 subclauses 12.1 and 12.2
EN 300 220 (EN 300 220-2, 4.2.2 Unwanted emissions in the spurious domain (EN 300 330-1, 5.9 Unwanted emissions in the spurious domain)
EN 300 328 18.104.22.168 Transmitter unwanted emissions in the spurious domain 22.214.171.124 Receiver spurious emission
EN 300 330 4.3.8 Transmitter radiated spurious domain emission limits < 30 MHz 4.3.9 Transmitter radiated spurious domain emission limits > 30 MHz 4. 4.2 Receiver spurious emissions
EN 300 440 4.3.5 Spurious radiations
EN 303 413 5.5 Receiver spurious emissions test
ETSI EN 301 511 clauses 5.2.16 and 5.2.17
ETSI EN 301 893 Radiated Tx and Rx spurious only Restriction: measurement frequency up to 18 GHz
ETSI EN 301 908-1 Radiated Emissions UE (Devices falling under -2 and – 13)
RF standard EN300 328 V2.1.1 for wideband transmission systems expires 31st October 2021. It is replaced by EN300 328 V2.2.2. Now is a good time